Looking for staff pick simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 4

Air Conditioning and Ventilation Webinar Session 4. Ventilation design of a 3 Clean Room configurations is analysed via Laminar Steady State simulations with scalar quantity.

This project focus on the stress analysis of two different models of cardiovascular stent using two different materials - 316 LN Stainless Steel and L605 Co-Cr.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.
You can find the tutorial for this project here: https://www.simscale.com/docs/tutorials/conjugate-heat-transfer-cooling-of-electronic-sink/

Convective Heat Transfer application for room heating.

This project demonstrates the hip joint prosthesis for the femur bone. Several types of materials are tested for the hip joint in this case including Co-Cr-Mo on Ti-6Al-4V, Co-Cr-Mo on UHMWPE and Concrete on Concrete.

This project is part of session 1 of the Air Conditioning and Ventilation webinar. It shows how the cooling of a Data center room can be simulated using SimScale.

The 1930's P2 is a modified version of the car that won the first Automobile World Championship in 1925.  Both car (by Carco) and mannequin (by Emmanuel Mahay) can be found at GrabCAD.

Webinar project for Air-Conditioning and Ventilation Session 2

CFD Analysis of a formula style 2-seater car
https://github.com/y-yosuke/formula-ppoino
Issue - More Front Downforce!!
https://github.com/y-yosuke/formula-ppoino/issues/12

This project analysis the cooling of a PCB board via CHT

Air Conditioning and Ventilation Webinar Session3 - Transient simulation for heating of a living room

A study to demonstrate the necessity of winglets in supressing  wingtip vortices which are shed from the ends of wings in airplanes. These velocity fields are visualized for a wing with and without a wingtip attachment. Vortices shed for the latter case is observed.  These  result in performance losses by reducing lift generated which is quantified in the present study. 

CHT simulation of heat sink with temperature source

In this project drop of a drone on a rigid plate was simulated.

Original project of @rszoeke

A Test of the CHT Capability on a heat exchanger

This project demonstrates the analysis of a mechanical arm using all available structural solvers on SimScale.

Aerodynamic simulation of the flow over a truck

This a PERRINN project - for more details go to www.perrinn.com

this a PERRINN project - for more details go to www.perrinn.com

The eternal battle between normal harness and cocoon.

Burst pressure analysis of a steel 20 lb propane tank.

NASA's Turbulence Modelling Resource was created with the purpose of offering documentation on the various RANS turbulence models available and some reference cases to verify the implementation of such models.

Albeit the differences in  the implementation of the models in OpenFOAM and NASA documentation, with this project we will see if we can get comparable results.

An aerodynamics study of the unique F-117 design in SimScale.

this plane flies really well inside.  just wanted something fun to draw and simulate

CFD analysis to verify the experimental results carried out on NACA 64015A Swpetback wing at AoA zero degree and Sweep angle 20 degrees.

Reference:  http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19980227185.pdf

Sample project for  fluid flow through a basket strainer by SimScale

External aerodynamics on the geometry of the 2016 Ford Shelby GT350R Mustang.

The purpose of this project is to setup the wind tunnel conditions for external flows around objects at varying boundary conditions. Although X 43 is a hypersonic aircraft but for this project subsonic conditions are applied. 

This is the current wheel used on Cruzee. The material is Polypropylene and meets all structural needs. This simulation compares the normal wheel to a lighter wheel with fewer spokes and an improved spoke section. It is therefore tested that will it maintain the same level of stiffness radially and laterally while reducing weight.

In this project, a dynamic nonlinear impact analysis of a human skull with and without helmet is performed.

This project simulates airfow around a Semi-Truck with container trailer.

Outrigger bending test - Original project of @dakalio

Sample project for flow through a textile fabric done by SimScale

This project shows the thermostructural analysis of basket strainer.

This project shows the thermal analysis of a LED with Insulated Metal Substrate - IMS - mounted on different heat sinks.

This project shows the nonlinear static analysis of a car suspension.

This is an example of analyzing a sheet metal box in simscale. Ideally we would like to use Shell elements but it can be done with Solid elements as well. In this example we look at the effects of a sheet metal with and without ribs as well as validating the accuracy of the model.

Please see the Comments Section for more details on this Analysis.

In this project a thermal analysis of a laser beam welding (LBW) was performed.

This project shows the stress analysis of a pressure relief valve (PRV) under operation.

Analysis of the thermal stresses generated by thermal expansion - contraction differences between an aluminum housing and steel bearings

In this project the shrink fit analysis of tool holder is performed.

Hoppers are normally used in indrustries to store grain or another materials. 
The geometry of hopper was provided by GrabCAD user Ross.

Simple transport bracket to lift a 160kg injection moulding tool.

This project shows the stress analysis of a polytetrafluoroethylene (PTFE) oil seal is performed both with friction and without friction.

staff pick | SimScale Project Library | Page 4